hafiz

Cisco ConfigMaker can help you configure the following:

* Cisco 800, 1000, 1600, 1700, 2500, 2600, 3600, and 4000 series routers

* Cisco 1548 and 1548M switches

* Cisco FastHub 412, 412M, 424, and 424M hubs and hub stacks

* Ethernet and Fast Ethernet LAN connections

* ISDN BRI, ISDN PRI, ISDN leased line, Frame Relay, Point-to-Point Protocol (PPP) (serial), High-Level Data Link (HDLC), PPP over Ethernet (PPPoE), and asynchronous WAN connections

* Transmission Control Protocol/Internet Protocol (TCP/IP), Internetwork Packet Exchange (IPX), and AppleTalk Phase 2 routed protocols

* Enhanced Interior Gateway Routing Protocol (EIGRP) and Routing Information Protocol (RIP) version 2

* Cisco IOS Firewall features including Context-based Access Control (CBAC), global timer values, DOS attack thresholds, Java blocking, audit trail, and access lists

* Voice-over-IP (VoIP) connections to telephones, faxes, PBXs, and PSTNs

* Virtual Private Network (VPN) connections using IP Security (IPSec) and Internet Key Exchange (IKE) authentication and encryption protocols

* Committed Access Rate (CAR) quality-of-service (QoS) protocol

* Dial backup connections

* Dynamic Host Configuration Protocol (DHCP) server and DHCP relay features

* Network Address Translation (NAT) and Easy IP (Phase 1) addressing

* Device Simple Network Management Protocol (SNMP) read community strings, SNMP read/write community strings, and SNMP trap managers

* Channel service unit/data service unit (CSU/DSU) modules

* QoS settings on WAN links for VoIP

* Multiple WAN connections

* Read-back of NAT configuration

* PPPoE on Cisco 1700 series routers with Ethernet connections

Cisco ConfigMaker can also assist you with previously configured devices by

* Reading the existing configuration from the devices

* Issuing Cisco IOS show commands

* Pinging and Telnetting to network devices


download

jaber_jm2005

very good hafez thanks alot

hafiz

u r welcome man